|
|
Peristaltic pump control via USB interface
Balogh, Jaroslav ; Chmelař, Milan (referee) ; Čech, Petr (advisor)
The purpose of this bachelor’s thesis is to practical realization of connection between peristaltic pump Rainin Dynamax RP-1 and PC, using USB interface. Integrated circuit device FT232R has been used in USB-RS422 converter, due to modified RS422 interface, which the pump RP-1 uses. There was also developed software for pump’s remote controll. RP-1’s functions can be driven from remote side or eventually automatized with this software. This work is based on semestral thesis and in future can be used in another aplications with RS422 or with RP-1 pump. Department of Biomedical Engineering, attached to FEEC, Brno University of Technology, will use this remote controll in analysis of DNA.
|
|
|
Versatile Control Unit of Solar Collectors
Tříska, Vít ; Růžička, Richard (referee) ; Šimek, Václav (advisor)
This thesis deals with design and implementation of a versatile control unit, which is primarily designed for control of solar collectors. It describes the various stages of design. First, the system of solar collectors is introduced. Its input-output parts are analyzed and the requirements are determined for the control unit. The characteristics of temperature sensors are examined, the work deals with continuous variable speed circulators. The following part is dedicated to hardware and software implementation of the objectives of the work. The boards were designed in Eagle design environment, the firmware was written in C programming language. In conclusion, the evaluation of the results of the proposed system and possible ways of its further development are discussed. The versatile control unit can be deployed in practice realistically.
|
|
|
Data storage system for area of civil aviation
Kotulič, Dominik ; Novák, Lukáš (referee) ; Šteffan, Pavel (advisor)
In the thesis the design of the Data Storage System (DSS) is proposed with the respect to the V-Model methodology. The design is based on users requirements, from which the system requirements are created and the technical specification of the DSS is developed. In the technical specifications the functionality of the DMM and HMI DSS subsystems are described and sub-system requirements are assigned to them, then they are subdivided and assigned to individual DMM (Data memory module) and HMI hardware items. Moreover, requirements are analyzed on hardware items, specific electronic components, are selected and implemented into the block design of the DMM hardware. Based on the block design of hardware, the hardware of the DMM subsystem is designed, selectively simulated and implemented along with the printed circuit board. On the implemented hardware of the DMM subsystems measurements are performed in order to verify the basic functionality of the hardware and the calculated, assimilated and measured values are compared as well. At the end of the thesis there is a short description of the implementation of the software design and its use for basic initialization of the selected processor, together with the verification of its basic function - measuring the frequency of the internal clock sources and the clock domains. The work is completed by sending a message of defined parameters to the selected communication line and sapling it by an oscilloscope, so that the basic function of the DMM subsystem is verified.
|
|
|
Data storage system for area of civil aviation
Kotulič, Dominik ; Novák, Lukáš (referee) ; Šteffan, Pavel (advisor)
In the thesis the design of the Data Storage System (DSS) is proposed with the respect to the V-Model methodology. The design is based on users requirements, from which the system requirements are created and the technical specification of the DSS is developed. In the technical specifications the functionality of the DMM and HMI DSS subsystems are described and sub-system requirements are assigned to them, then they are subdivided and assigned to individual DMM (Data memory module) and HMI hardware items. Moreover, requirements are analyzed on hardware items, specific electronic components, are selected and implemented into the block design of the DMM hardware. Based on the block design of hardware, the hardware of the DMM subsystem is designed, selectively simulated and implemented along with the printed circuit board. On the implemented hardware of the DMM subsystems measurements are performed in order to verify the basic functionality of the hardware and the calculated, assimilated and measured values are compared as well. At the end of the thesis there is a short description of the implementation of the software design and its use for basic initialization of the selected processor, together with the verification of its basic function - measuring the frequency of the internal clock sources and the clock domains. The work is completed by sending a message of defined parameters to the selected communication line and sapling it by an oscilloscope, so that the basic function of the DMM subsystem is verified.
|
|
|
Versatile Control Unit of Solar Collectors
Tříska, Vít ; Růžička, Richard (referee) ; Šimek, Václav (advisor)
This thesis deals with design and implementation of a versatile control unit, which is primarily designed for control of solar collectors. It describes the various stages of design. First, the system of solar collectors is introduced. Its input-output parts are analyzed and the requirements are determined for the control unit. The characteristics of temperature sensors are examined, the work deals with continuous variable speed circulators. The following part is dedicated to hardware and software implementation of the objectives of the work. The boards were designed in Eagle design environment, the firmware was written in C programming language. In conclusion, the evaluation of the results of the proposed system and possible ways of its further development are discussed. The versatile control unit can be deployed in practice realistically.
|
|
|
Peristaltic pump control via USB interface
Balogh, Jaroslav ; Chmelař, Milan (referee) ; Čech, Petr (advisor)
The purpose of this bachelor’s thesis is to practical realization of connection between peristaltic pump Rainin Dynamax RP-1 and PC, using USB interface. Integrated circuit device FT232R has been used in USB-RS422 converter, due to modified RS422 interface, which the pump RP-1 uses. There was also developed software for pump’s remote controll. RP-1’s functions can be driven from remote side or eventually automatized with this software. This work is based on semestral thesis and in future can be used in another aplications with RS422 or with RP-1 pump. Department of Biomedical Engineering, attached to FEEC, Brno University of Technology, will use this remote controll in analysis of DNA.
|
guest ::
